TC-1614 A/B is an unfilled , low viscosity epoxy resin system designed to seal porous to semi-porous substrates developing remarkable strength. TC-1614 A/B also has exceptional adhesive characteristics and is capable of high temperatures.
- Recommended by several 3D Printer Manufacturers
- Easy to use and apply
- Penetrates and seals porous surfaces with excellent adhesion
- Works great for sealing 3D Printed parts
- Withstands temperatures in excess of 350°F.
- Can be pigmented for color enhancement
Note: Ambient temperatures will affect the tack-free time of the sealer. Heat can speed up the cure of TC-1614 in a thin film. See data sheet or contact Tech Sales if you have questions.
**Ships non-hazardous by UPS Ground** Air and International see below!
Your hazardous material can only ship via Fed Ex International Priority One Air, Collect, on your Fed Ex account. Shipping cost can be as much as 4-5 times the cost of product. Contact BJB for shipping quotes if needed.
International Customers: Warning, shipping TC-1614 outside of the US is VERY expensive. You MUST contact BJB Customer Service to arrange shipment of product. Please email: email@example.com
WARNING: This product can expose you to chemicals including 4,4'-Isopropylidenediphenol, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
|Shore Hardness||Worktime||Demold Time||
|85 D||2 hours||24 hours||0.008||600 cps||100/20 pbw||Amber|