80 SHORE A, POLYURETHANE ELASTOMER
BJB’s “L Series”, with its 25 to 30 minute work time, is perfect for manufacturing larger or more complex parts and molds. The L-3580 REV 1 is an 80 Shore A material offering exceptional physical properties. You’ll also find the 2:1 ratio to be extremely convenient. For faster work and demold times consider M-3180 REV 1 (15-20 min.) or F-180 REV 1 (8-9 min.)
|
|
|
|
|
|
HELPFUL NOTES:
Color Variations: The color of the base material may vary slightly from batch to batch due to raw ingredients. Exposing the material to various conditions such as heat and UV light will alter the color of the cured system. Color stability is not guaranteed. This product can be pigmented, but you may see more color shift when using lighter pigments.
UV Resistance: This product is not classified as UV resistant. BJB offers an additive called UV-100, a UV inhibitor and anti-oxidant blend that will help slow down the effects of UV degradation and color change. The level of effectivness varies from product to product.
WARNING: This product can expose you to chemicals including Toluene diisocyanate, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Product Name | L-3580 REV 1 |
---|---|
Shore Hardness | 80 A |
Worktime | 25 - 30 minutes |
Demold TIme | 6 - 8 hours |
Shrinkage | 0.0010 |
Viscosity | 2,050 cps |
Ratio | 100/50 pbw |
MSDS Sheets | |
Product Data Sheet | |
Item Color | Amber |