50 SHORE A, POLYURETHANE ELASTOMER
BJB’s “M Series” with work times between 15 and 20 minutes is perfect for a variety of part and mold applications. These flexible systems exhibit exceptional physical properties with a convenient mix ratio. For a faster work time consider our F-150 REV 1 (6-7 min.) or L-3550 REV 1 (25-30 min.) for a longer work time.
|
|
|
|
|
|
HELPFUL NOTES:
Color Variations: The color of the base material may vary slightly from batch to batch due to raw ingredients. Exposing the material to various conditions such as heat and UV light will alter the color of the cured system. Color stability is not guaranteed. This product can be pigmented, but you may see more color shift when using lighter pigments.
UV Resistance: This product is not classified as UV resistant. BJB offers an additive called UV-100, a UV inhibitor and anti-oxidant blend that will help slow down the effects of UV degradation and color change. The level of effectivness varies from product to product.
Silicone Molds: Platinum based silicones are recommended for molds. Tin based silicones may cause cure inhibition. For more info, contact our Tech Dept
WARNING: This product can expose you to chemicals including Toluene diisocyanate, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Product Name | M-3150 REV 1 |
---|---|
Shore Hardness | 50 A |
Worktime | 15 - 20 minutes |
Demold TIme | 6 - 8 hours |
Shrinkage | 0.0010 |
Viscosity | 1,700 cps |
Ratio | 100/100 pbw |
MSDS Sheets | |
Product Data Sheet | |
Item Color | Amber |