TC-1622 A/B is an unfilled laminating resin for high temperature mold and part fabrication formulated to provide superior wet-out and adhesion to a variety of substrates. It is a great material for Vacuum Assisted Resin Transfer Molding (VARTM) as well as other wet lay-up methods due to its low viscosity and long working time. When properly cured TC-1622 A/B can be used up to 350°F (177°C).
WARNING: This product can expose you to chemicals including 4,4'-Isopropylidenediphenol, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
|Shore Hardness||Worktime||Demold Time||
|85 D||2 hours||24 hours||0.008||600 cps||100/20 pbw|