TC-1650 A/B

Quick Overview

HI-TEMP ALUMINUM FILLED CASTING RESIN SYSTEM

* Required Fields

Price From:
Price From: $75.00

Availability: In stock

Price From: $75.00

Details

TC-1650 A/B is an aluminum powder filled epoxy casting resin system that provides service temperatures to 350°F (177°C). TC-1650 A/B is most commonly used for the construction of molds that require good heat conductivity, outstanding durability and provide production run capability. TC-1650 is commonly combined with SC-125 Aluminum Granules for casting sections thicker than 1" (25mm) to decrease shrinkage and lower exotherm.

NOTE: If casting TC-1650 A/B (without SC-125 Granules) requires sections to be thicker than 1”, use TC-1651 A/B for thicknesses up to 3”. Request BJB technical advice for additional assistance.

**Hazardous Fees Apply when Shipping by Air and Ground** corrosive

Prop 65 WarningWARNING: This product can expose you to chemicals including 4,4'-Isopropylidenediphenol, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.


Shore Hardness Worktime Demold Time Shrinkage
(in./in.)
Viscosity Ratio
pbw(pbv)
Color
90 D60 minutes16-24 hours0.00215,500 cps100/7 pbwGray

Additional Information

Item Color Gray