WC-783 A/B is an impact resistant, rigid, 82 Shore D material that is commonly used to make clear or tinted castings of all kinds. The standard work time is 15 minutes, however 5 additional work speeds are available. A mild post-cure is recommended for best results.
*The 15-minute work time is the standard in stock product. Also available with a 30, 60, 90, 180, and 240 minute work times. Demold time is dependent on work time.
Silicone Molds: Platinum based silicones are recommended for molds. Tin based silicones may cause cure inhibition. For more info, contact our Tech Dept.
WARNING: This product can expose you to chemicals including N-Methylpyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
|Shore Hardness||Worktime||Demold Time||
|82 D||15 minutes||6-8 hours||0.002||650 cps||100/90 pbw||Clear|